Прошу IT-сообщество помочь...

Ответить


Этот вопрос предназначен для предотвращения автоматической отправки форм спам-ботами.
Смайлики
:grin: :-) :-( :o 8-0 :lol: :-x :-P :oops: :cry: :evil: :twisted: :roll: ;-) :idea: :heart: :hang: :stop: :crazy: :hello2: :shock: :wall:
Ещё смайлики…

BBCode ВКЛЮЧЁН
[img] ВКЛЮЧЁН
[flash] ОТКЛЮЧЕН
[url] ВКЛЮЧЁН
Смайлики ВКЛЮЧЕНЫ

Обзор темы
   

Развернуть Обзор темы: Прошу IT-сообщество помочь...

Re: Прошу IT-сообщество помочь...

NDI » Пн мар 25, 2013 4:08

Ничего я не понимаю...
Часов с 19:00 (вск) модем стал устойчиво держать DSL-линк но подключаться так и не хотел... Сейчас вот с утра-пораньше та же фигня была... Потом тупо взял и подключился после очередной перезагрузки... (Настройки не менял!)
RED_SPY писал(а):Что логи говорят?

Вот логи на момент, когда DSL-линк устойчивый но подключения не было...
Jan 1 00:00:13,user,info,kernel: PPP generic driver version 2.4.2 79;
Jan 1 00:00:13,user,info,kernel: PPP Deflate Compression module registered 88;
Jan 1 00:00:13,user,info,kernel: PPP BSD Compression module registered 84;
Jan 1 00:00:13,user,info,kernel: PPPoL2TP kernel driver, V1.0 75;
Jan 1 00:00:13,user,warn,kernel: Sysinfo: ccp_autowan_sm_thread=> Starts in Unconfigured mode, detecting state! 125;
Jan 1 00:00:13,user,warn,kernel: Sysinfo: -> disconnected state! 78;
Jan 1 00:00:30,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> dslWanSt=1, ethWanSt=0 81;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:00:43,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:00:47,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:00:51,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:00:52,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:00:52,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:01:08,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:01:08,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:01:08,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:01:11,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:01:11,user,warn,kernel: Sysinfo: -> dslWanSt=1, ethWanSt=0 81;
Jan 1 00:01:11,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:01:23,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:01:27,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:01:32,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:01:32,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:01:32,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:01:34,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:01:35,daemon,info,syslog: PPP send ConfReq id=0x1 [asyncmap 0x0] [magic 0xf474cd59] [pcomp] [accomp] 123;
Jan 1 00:01:38,daemon,info,syslog: PPP send ConfReq id=0x1 [asyncmap 0x0] [magic 0xf474cd59] [pcomp] [accomp] 123;
Jan 1 00:01:41,daemon,info,syslog: PPP send ConfReq id=0x1 [asyncmap 0x0] [magic 0xf474cd59] [pcomp] [accomp] 123;
Jan 1 00:01:44,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:01:44,daemon,info,syslog: PPP send ConfReq id=0x2 [asyncmap 0x0] [magic 0x5dd438ba] [pcomp] [accomp] 123;
Jan 1 00:01:44,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:01:44,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:01:47,daemon,info,syslog: PPP send ConfReq id=0x2 [asyncmap 0x0] [magic 0x5dd438ba] [pcomp] [accomp] 123;
Jan 1 00:01:48,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:01:48,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:01:48,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:01:50,daemon,info,syslog: PPP send ConfReq id=0x2 [asyncmap 0x0] [magic 0x5dd438ba] [pcomp] [accomp] 123;
Jan 1 00:01:50,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:01:50,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:01:53,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:01:53,daemon,info,syslog: PPP send ConfReq id=0x3 [asyncmap 0x0] [magic 0x7dc15f5a] [pcomp] [accomp] 123;
Jan 1 00:01:56,daemon,info,syslog: PPP send ConfReq id=0x3 [asyncmap 0x0] [magic 0x7dc15f5a] [pcomp] [accomp] 123;
Jan 1 00:01:59,daemon,info,syslog: PPP send ConfReq id=0x3 [asyncmap 0x0] [magic 0x7dc15f5a] [pcomp] [accomp] 123;
Jan 1 00:02:02,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:02:02,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:02,daemon,info,syslog: PPP send ConfReq id=0x4 [asyncmap 0x0] [magic 0x3158cd83] [pcomp] [accomp] 123;
Jan 1 00:02:05,daemon,info,syslog: PPP send ConfReq id=0x4 [asyncmap 0x0] [magic 0x3158cd83] [pcomp] [accomp] 123;
Jan 1 00:02:07,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:02:08,daemon,info,syslog: PPP send ConfReq id=0x4 [asyncmap 0x0] [magic 0x3158cd83] [pcomp] [accomp] 123;
Jan 1 00:02:11,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:02:12,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:02:12,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:02:14,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:15,daemon,info,syslog: PPP send ConfReq id=0x5 [asyncmap 0x0] [magic 0x1f1a9eee] [pcomp] [accomp] 123;
Jan 1 00:02:18,daemon,info,syslog: PPP send ConfReq id=0x5 [asyncmap 0x0] [magic 0x1f1a9eee] [pcomp] [accomp] 123;
Jan 1 00:02:21,daemon,info,syslog: PPP send ConfReq id=0x5 [asyncmap 0x0] [magic 0x1f1a9eee] [pcomp] [accomp] 123;
Jan 1 00:02:22,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:22,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:02:22,daemon,crit,syslog: PPPoE received PADO. 70;
Jan 1 00:02:22,daemon,crit,syslog: PPPoE sending PADR. 69;
Jan 1 00:02:22,daemon,crit,syslog: PPPoE server detected. 72;
Jan 1 00:02:22,daemon,crit,syslog: PPPoE received PADS, PPP session established. 95;
Jan 1 00:02:23,user,err,kernel: PPP: couldn't register device ppp0 (-17) 86;
Jan 1 00:02:23,daemon,crit,syslog: PPPoE sending PADT. 69;
Jan 1 00:02:24,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:24,daemon,info,syslog: PPP send ConfReq id=0x6 [asyncmap 0x0] [magic 0x4ccb43ae] [pcomp] [accomp] 123;
Jan 1 00:02:26,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:26,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:02:26,daemon,crit,syslog: PPPoE Received PADT, session has terminated. 94;
Jan 1 00:02:27,daemon,info,syslog: PPP send ConfReq id=0x6 [asyncmap 0x0] [magic 0x4ccb43ae] [pcomp] [accomp] 123;
Jan 1 00:02:28,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:02:28,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:02:28,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:02:30,daemon,info,syslog: PPP send ConfReq id=0x6 [asyncmap 0x0] [magic 0x4ccb43ae] [pcomp] [accomp] 123;
Jan 1 00:02:30,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:02:30,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:02:33,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:33,daemon,info,syslog: PPP send ConfReq id=0x7 [asyncmap 0x0] [magic 0x1aa8c168] [pcomp] [accomp] 123;
Jan 1 00:02:36,daemon,info,syslog: PPP send ConfReq id=0x7 [asyncmap 0x0] [magic 0x1aa8c168] [pcomp] [accomp] 123;
Jan 1 00:02:39,daemon,info,syslog: PPP send ConfReq id=0x7 [asyncmap 0x0] [magic 0x1aa8c168] [pcomp] [accomp] 123;
Jan 1 00:02:42,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:02:42,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:42,daemon,info,syslog: PPP send ConfReq id=0x8 [asyncmap 0x0] [magic 0xe61b5ace] [pcomp] [accomp] 123;
Jan 1 00:02:45,daemon,info,syslog: PPP send ConfReq id=0x8 [asyncmap 0x0] [magic 0xe61b5ace] [pcomp] [accomp] 123;
Jan 1 00:02:46,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:02:48,daemon,info,syslog: PPP send ConfReq id=0x8 [asyncmap 0x0] [magic 0xe61b5ace] [pcomp] [accomp] 123;
Jan 1 00:02:51,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:02:51,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:02:51,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:02:54,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:02:55,daemon,info,syslog: PPP send ConfReq id=0x9 [asyncmap 0x0] [magic 0xefd38a92] [pcomp] [accomp] 123;
Jan 1 00:02:58,daemon,info,syslog: PPP send ConfReq id=0x9 [asyncmap 0x0] [magic 0xefd38a92] [pcomp] [accomp] 123;
Jan 1 00:03:01,daemon,info,syslog: PPP send ConfReq id=0x9 [asyncmap 0x0] [magic 0xefd38a92] [pcomp] [accomp] 123;
Jan 1 00:03:02,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:02,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:03:02,daemon,crit,syslog: PPPoE received PADO. 70;
Jan 1 00:03:02,daemon,crit,syslog: PPPoE sending PADR. 69;
Jan 1 00:03:02,daemon,crit,syslog: PPPoE server detected. 72;
Jan 1 00:03:04,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:04,daemon,info,syslog: PPP send ConfReq id=0xa [asyncmap 0x0] [magic 0x2cc940c1] [pcomp] [accomp] 123;
Jan 1 00:03:07,daemon,info,syslog: PPP send ConfReq id=0xa [asyncmap 0x0] [magic 0x2cc940c1] [pcomp] [accomp] 123;
Jan 1 00:03:08,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:03:08,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:03:08,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:03:10,daemon,info,syslog: PPP send ConfReq id=0xa [asyncmap 0x0] [magic 0x2cc940c1] [pcomp] [accomp] 123;
Jan 1 00:03:10,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:03:10,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:03:13,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:13,daemon,info,syslog: PPP send ConfReq id=0xb [asyncmap 0x0] [magic 0x6dec6375] [pcomp] [accomp] 123;
Jan 1 00:03:16,daemon,info,syslog: PPP send ConfReq id=0xb [asyncmap 0x0] [magic 0x6dec6375] [pcomp] [accomp] 123;
Jan 1 00:03:19,daemon,info,syslog: PPP send ConfReq id=0xb [asyncmap 0x0] [magic 0x6dec6375] [pcomp] [accomp] 123;
Jan 1 00:03:22,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:03:22,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:22,daemon,info,syslog: PPP send ConfReq id=0xc [asyncmap 0x0] [magic 0xbd52f7f8] [pcomp] [accomp] 123;
Jan 1 00:03:25,daemon,info,syslog: PPP send ConfReq id=0xc [asyncmap 0x0] [magic 0xbd52f7f8] [pcomp] [accomp] 123;
Jan 1 00:03:27,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:03:28,daemon,info,syslog: PPP send ConfReq id=0xc [asyncmap 0x0] [magic 0xbd52f7f8] [pcomp] [accomp] 123;
Jan 1 00:03:31,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:03:31,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:03:31,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:03:34,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:34,daemon,info,syslog: PPP send ConfReq id=0xd [asyncmap 0x0] [magic 0x70e15a04] [pcomp] [accomp] 123;
Jan 1 00:03:37,daemon,info,syslog: PPP send ConfReq id=0xd [asyncmap 0x0] [magic 0x70e15a04] [pcomp] [accomp] 123;
Jan 1 00:03:40,daemon,info,syslog: PPP send ConfReq id=0xd [asyncmap 0x0] [magic 0x70e15a04] [pcomp] [accomp] 123;
Jan 1 00:03:42,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:42,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:03:43,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:43,daemon,info,syslog: PPP send ConfReq id=0xe [asyncmap 0x0] [magic 0xbc2dd8a1] [pcomp] [accomp] 123;
Jan 1 00:03:46,daemon,info,syslog: PPP send ConfReq id=0xe [asyncmap 0x0] [magic 0xbc2dd8a1] [pcomp] [accomp] 123;
Jan 1 00:03:47,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:03:47,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:03:47,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:03:49,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:03:49,daemon,info,syslog: PPP send ConfReq id=0xe [asyncmap 0x0] [magic 0xbc2dd8a1] [pcomp] [accomp] 123;
Jan 1 00:03:50,user,warn,kernel: Sysinfo: -> dslWanSt=1, ethWanSt=0 81;
Jan 1 00:03:50,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:03:53,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:03:53,daemon,info,syslog: PPP send ConfReq id=0xf [asyncmap 0x0] [magic 0xb190ec09] [pcomp] [accomp] 123;
Jan 1 00:03:56,daemon,info,syslog: PPP send ConfReq id=0xf [asyncmap 0x0] [magic 0xb190ec09] [pcomp] [accomp] 123;
Jan 1 00:03:59,daemon,info,syslog: PPP send ConfReq id=0xf [asyncmap 0x0] [magic 0xb190ec09] [pcomp] [accomp] 123;
Jan 1 00:04:02,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:04:02,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:02,daemon,info,syslog: PPP send ConfReq id=0x10 [asyncmap 0x0] [magic 0xda4355d] [pcomp] [accomp] 123;
Jan 1 00:04:05,daemon,info,syslog: PPP send ConfReq id=0x10 [asyncmap 0x0] [magic 0xda4355d] [pcomp] [accomp] 123;
Jan 1 00:04:07,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:04:08,daemon,info,syslog: PPP send ConfReq id=0x10 [asyncmap 0x0] [magic 0xda4355d] [pcomp] [accomp] 123;
Jan 1 00:04:11,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:04:11,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:04:11,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:04:14,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:14,daemon,info,syslog: PPP send ConfReq id=0x11 [asyncmap 0x0] [magic 0x62e13cc4] [pcomp] [accomp] 124;
Jan 1 00:04:17,daemon,info,syslog: PPP send ConfReq id=0x11 [asyncmap 0x0] [magic 0x62e13cc4] [pcomp] [accomp] 124;
Jan 1 00:04:20,daemon,info,syslog: PPP send ConfReq id=0x11 [asyncmap 0x0] [magic 0x62e13cc4] [pcomp] [accomp] 124;
Jan 1 00:04:22,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:22,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:04:23,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:23,daemon,info,syslog: PPP send ConfReq id=0x12 [asyncmap 0x0] [magic 0x9b09407b] [pcomp] [accomp] 124;
Jan 1 00:04:26,daemon,info,syslog: PPP send ConfReq id=0x12 [asyncmap 0x0] [magic 0x9b09407b] [pcomp] [accomp] 124;
Jan 1 00:04:29,daemon,info,syslog: PPP send ConfReq id=0x12 [asyncmap 0x0] [magic 0x9b09407b] [pcomp] [accomp] 124;
Jan 1 00:04:31,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:04:31,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:04:31,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:04:33,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:33,daemon,info,syslog: PPP send ConfReq id=0x13 [asyncmap 0x0] [magic 0x58097416] [pcomp] [accomp] 124;
Jan 1 00:04:34,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:04:34,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:04:36,daemon,info,syslog: PPP send ConfReq id=0x13 [asyncmap 0x0] [magic 0x58097416] [pcomp] [accomp] 124;
Jan 1 00:04:39,daemon,info,syslog: PPP send ConfReq id=0x13 [asyncmap 0x0] [magic 0x58097416] [pcomp] [accomp] 124;
Jan 1 00:04:45,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:45,daemon,info,syslog: PPP send ConfReq id=0x14 [asyncmap 0x0] [magic 0xb0321ccb] [pcomp] [accomp] 124;
Jan 1 00:04:46,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:04:48,daemon,info,syslog: PPP send ConfReq id=0x14 [asyncmap 0x0] [magic 0xb0321ccb] [pcomp] [accomp] 124;
Jan 1 00:04:51,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:04:51,daemon,info,syslog: PPP send ConfReq id=0x14 [asyncmap 0x0] [magic 0xb0321ccb] [pcomp] [accomp] 124;
Jan 1 00:04:55,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:04:55,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:04:55,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:04:58,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:04:58,daemon,info,syslog: PPP send ConfReq id=0x15 [asyncmap 0x0] [magic 0x7bed5731] [pcomp] [accomp] 124;
Jan 1 00:05:01,daemon,info,syslog: PPP send ConfReq id=0x15 [asyncmap 0x0] [magic 0x7bed5731] [pcomp] [accomp] 124;
Jan 1 00:05:04,daemon,info,syslog: PPP send ConfReq id=0x15 [asyncmap 0x0] [magic 0x7bed5731] [pcomp] [accomp] 124;
Jan 1 00:05:06,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE received PADO. 70;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE sending PADR. 69;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE server detected. 72;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE received PADS, PPP session established. 95;
Jan 1 00:05:06,user,err,kernel: PPP: couldn't register device ppp0 (-17) 86;
Jan 1 00:05:06,daemon,crit,syslog: PPPoE sending PADT. 69;
Jan 1 00:05:07,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:07,daemon,info,syslog: PPP send ConfReq id=0x16 [asyncmap 0x0] [magic 0x91621d7c] [pcomp] [accomp] 124;
Jan 1 00:05:09,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:09,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:05:10,daemon,info,syslog: PPP send ConfReq id=0x16 [asyncmap 0x0] [magic 0x91621d7c] [pcomp] [accomp] 124;
Jan 1 00:05:11,user,crit,kernel: Line 0: ADSL link down 69;
Jan 1 00:05:11,user,warn,kernel: Sysinfo: -> down-disconnected state! 83;
Jan 1 00:05:12,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:05:13,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:05:13,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:05:14,daemon,info,syslog: PPP send ConfReq id=0x16 [asyncmap 0x0] [magic 0x91621d7c] [pcomp] [accomp] 124;
Jan 1 00:05:17,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:17,daemon,info,syslog: PPP send ConfReq id=0x17 [asyncmap 0x0] [magic 0xf811fe28] [pcomp] [accomp] 124;
Jan 1 00:05:20,daemon,info,syslog: PPP send ConfReq id=0x17 [asyncmap 0x0] [magic 0xf811fe28] [pcomp] [accomp] 124;
Jan 1 00:05:23,daemon,info,syslog: PPP send ConfReq id=0x17 [asyncmap 0x0] [magic 0xf811fe28] [pcomp] [accomp] 124;
Jan 1 00:05:26,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:05:26,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:26,daemon,info,syslog: PPP send ConfReq id=0x18 [asyncmap 0x0] [magic 0xafabaaac] [pcomp] [accomp] 124;
Jan 1 00:05:29,daemon,info,syslog: PPP send ConfReq id=0x18 [asyncmap 0x0] [magic 0xafabaaac] [pcomp] [accomp] 124;
Jan 1 00:05:30,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:05:32,daemon,info,syslog: PPP send ConfReq id=0x18 [asyncmap 0x0] [magic 0xafabaaac] [pcomp] [accomp] 124;
Jan 1 00:05:35,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:05:35,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:05:35,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:05:38,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:38,daemon,info,syslog: PPP send ConfReq id=0x19 [asyncmap 0x0] [magic 0xf05faed2] [pcomp] [accomp] 124;
Jan 1 00:05:41,daemon,info,syslog: PPP send ConfReq id=0x19 [asyncmap 0x0] [magic 0xf05faed2] [pcomp] [accomp] 124;
Jan 1 00:05:44,daemon,info,syslog: PPP send ConfReq id=0x19 [asyncmap 0x0] [magic 0xf05faed2] [pcomp] [accomp] 124;
Jan 1 00:05:46,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:46,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:05:47,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:05:47,daemon,info,syslog: PPP send ConfReq id=0x1a [asyncmap 0x0] [magic 0x9ff79c94] [pcomp] [accomp] 124;
Jan 1 00:05:48,daemon,crit,syslog: PPPoE received PADO. 70;
Jan 1 00:05:48,daemon,crit,syslog: PPPoE sending PADR. 69;
Jan 1 00:05:48,daemon,crit,syslog: PPPoE server detected. 72;
Jan 1 00:05:48,daemon,crit,syslog: PPPoE received PADS, PPP session established. 95;
Jan 1 00:05:48,user,err,kernel: PPP: couldn't register device ppp0 (-17) 86;
Jan 1 00:05:48,daemon,crit,syslog: PPPoE sending PADT. 69;

А вот логи после того как модем успешно подключился...
Jan 1 00:00:13,user,info,kernel: PPP generic driver version 2.4.2 79;
Jan 1 00:00:13,user,info,kernel: PPP Deflate Compression module registered 88;
Jan 1 00:00:13,user,info,kernel: PPP BSD Compression module registered 84;
Jan 1 00:00:13,user,info,kernel: PPPoL2TP kernel driver, V1.0 75;
Jan 1 00:00:13,user,warn,kernel: Sysinfo: ccp_autowan_sm_thread=> Starts in Unconfigured mode, detecting state! 125;
Jan 1 00:00:13,user,warn,kernel: Sysinfo: -> disconnected state! 78;
Jan 1 00:00:30,user,crit,kernel: Line 0: xDSL G.994 training 74;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> detecting state! 75;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> dslWanSt=1, ethWanSt=0 81;
Jan 1 00:00:30,user,warn,kernel: Sysinfo: -> RJ11 Training state! 79;
Jan 1 00:00:43,user,crit,kernel: Line 0: ADSL G.992 started 73;
Jan 1 00:00:47,user,crit,kernel: Line 0: ADSL G.992 channel analysis 82;
Jan 1 00:00:51,user,crit,kernel: Line 0: ADSL G.992 message exchange 82;
Jan 1 00:00:52,user,crit,kernel: Line 0: ADSL link up, Bearer 0, us=638, ds=6143 94;
Jan 1 00:00:52,user,warn,kernel: Sysinfo: -> RJ11 state! 70;
Jan 1 00:01:09,daemon,notice,syslog: PPP=> Start to connect ... 78;
Jan 1 00:01:09,daemon,crit,syslog: PPPoE sending PADI. 69;
Jan 1 00:01:09,daemon,crit,syslog: PPPoE received PADO. 70;
Jan 1 00:01:09,daemon,crit,syslog: PPPoE sending PADR. 69;
Jan 1 00:01:09,daemon,crit,syslog: PPPoE server detected. 72;
Jan 1 00:01:09,daemon,crit,syslog: PPPoE received PADS, PPP session established. 95;
Jan 1 00:01:09,daemon,info,syslog: PPP send ConfReq id=0x1 [magic 0x662b7b3c] 91;
Jan 1 00:01:09,daemon,info,syslog: PPP receive ConfAck id=0x1 [magic 0x662b7b3c] 94;
Jan 1 00:01:12,daemon,info,syslog: PPP receive ConfReq id=0x1 [mru 1492] [auth pap] [magic 0xb0019fc] 115;
Jan 1 00:01:12,daemon,info,syslog: PPP send ConfAck id=0x1 [mru 1492] [auth pap] [magic 0xb0019fc] 112;
Jan 1 00:01:12,daemon,crit,syslog: PPP LCP UP. 61;
Jan 1 00:01:12,daemon,info,syslog: PPP receive AuthAck id=0x1 Authentication success,Welcome! 107;
Jan 1 00:01:12,daemon,info,syslog: PPP send ConfReq id=0x1 [addr ] [ms-dns1 ] [ms-dns3 ] 102;
Jan 1 00:01:12,daemon,info,syslog: PPP receive ConfReq id=0x0 [addr ] 83;
Jan 1 00:01:12,daemon,info,syslog: PPP send ConfAck id=0x0 [addr ] 80;
Jan 1 00:01:12,daemon,info,syslog: PPP receive ConfNak id=0x1 [addr ] [ms-dns1 ] [ms-dns3 ] 105;
Jan 1 00:01:12,daemon,info,syslog: PPP send ConfReq id=0x2 [addr ] [ms-dns1 ] [ms-dns3 ] 102;
Jan 1 00:01:12,daemon,info,syslog: PPP receive ConfAck id=0x2 [addr ] [ms-dns1 ] [ms-dns3 ] 105;
Jan 1 00:01:12,daemon,crit,syslog: PPP Received IP address 89.109.57.63 from server. 99;
Jan 1 00:01:12,daemon,crit,syslog: PPP Received primary DNS address 213.177.97.201 from server. 110;
Jan 1 00:01:12,daemon,crit,syslog: PPP Received secondary DNS address 213.177.97.1 from server. 110;
Jan 1 00:01:12,daemon,crit,syslog: PPP Received valid IP address from server. Connection UP. 108;

Честно говоря, мало что в них понял... Хотелось бы узнать... ЧТО это было???
SnuS писал(а):...кстати,ты это домой купил?))
Да...
SnuS писал(а):у меня в ящике на работе три таких сиськи валяются.анамнез у всех один - обновили ПО.диагноз пока не поставили...

Пока рылся в интернетах узнал следующее... Последняя прошивка на х3000-ее - версии 1.0.04 (с поддержкой ipv6) некорректно работала у многих... Её даже с оффсайта убрали (сейчас там 1.0.03)...
З.ы.: В базе модем был с прошей 1.0.01. Качал и ставил сразу 1.0.03, т.к. с базовой модем не хотел подключаться совсем...

Re: Прошу IT-сообщество помочь...

SnuS » Вс мар 24, 2013 21:45

у меня в ящике на работе три таких сиськи валяются.анамнез у всех один - обновили ПО.диагноз пока не поставили,руки не доходят))парни говорили,что даунгрэйд не хочет делать...кстати,ты это домой купил?))

Re: Прошу IT-сообщество помочь...

RED_SPY » Вс мар 24, 2013 21:29

Что логи говорят?

Прошу IT-сообщество помочь...

NDI » Вс мар 24, 2013 19:57

Здравствуйте, господа...
Проблема такова... Взял давеча Linksys x3000-ee... После обновления прошивки до последней версии заработал без проблем... Однако спустя где-то 12 часов упал DSL-линк... И циклически терял-поднимал его, так и не подключаясь к сети... В вск. звонил в тп... Как и ожидалось, навесили лапши на уши, так ничего и не сделав... Сейчас подключил старый D-Link - держит всё нормально...
Собственно, вопросы таковы... Кто-то сталкивался с Linksys? Чем шить, если шить? И надо-ли ещё? Где ещё поковырять, что б и так заработал?
Больно уж не хочется сдаваться и сдавать аппарат в магазин... За любой совет буду благодарен... Спасибо... :)

Вернуться к началу